深圳汉莎技术2018秋季招聘信息

 作者:UPS电源    |      2020-10-07 16:54    |    标签: 汉莎 技术类 深圳 招聘 技术 信息 秋季 2018

  技术类

  ??Engine Technician发动机技术员

  【岗位职责】

  ·?Responsible for engine related engineering tasks e.g. Job card creation and revision, evaluation of EM/AMM related tasks (25%)

  ·?Focus point for customer service and production for all technical questions (10%)

  ·?Technical support during in shop and onsite maintenance events for V2500 and CFM56 engine series (20%)

  ·?Creation of tool / material lists for services according customers demand (15%)

  ·?Evaluation of necessary qualifications during Job card creation (5%)

  ·?Capability set up of new products / engine types (5%)

  ·?Collaborate with production in terms of repair development, rectification and product improvement (10%)

  ·?Takes on special projects and all other duties assigned by the Head of Engine (10%)

  【任职资格】

  ·?Bachelor degree or above, majored in engineering, preferred in power plant engineering;

  ·?CAAC Maintenance Personnel or CAAC Management Personnel License holder is a plus;

  ·?Min. 5 years of relevant work experience in the Aviation MRO or equivalent experience with strong engine technology and engine shop background; Thorough knowledge of CAAC/EASA/FAA aviation maintenance legislation;

  ·?Thorough knowledge of CAAC/EASA/FAA aviation maintenance legislation;

  ·?Industry knowledge is required, Engine type training V2500 / GTF / CFM56 desirable;

  ·?Excellent command of English language, Chinese or German language desirable.

  ?

  ??Sheet Metal Mechanic钣金技术员

  【岗位职责】

  ·?各种飞机结构部件的钣金修理工作

  ·?监管学徒的钣金修理工作

  ·?提供钣金修理基础操作培训

  【任职资格】

  ·?至少高中 / 技校毕业,钣铆专业

  ·?具备扎实的钣金结构修理基础理论知识和较强的实践操作能力

  ·?3 年以上航空钣金结构修理工作经验

  ·?具备一定的英语能力者优先

  ?

  
 

  ??Hydraulic technician液压技术员

  【岗位职责】

  ·?根据生产计划,从事飞机液压附件的修理;

  ·?配合工程部完成技术攻关和新项目开发;

  ·?保证工作符合公司质量政策/程序和环境健康安全政策;

  ·?维修用工具设备的日常维护保养;

  ·?完成主管要求的其他任务。

  【任职资格】

  ·?航空专业职业学校(技校)毕业,且不少于3年飞机附件维修经验,或者航空专业大专或本科学历,且不少于3年飞机附件维修经验;

  ·?具有液压泵、马达、动力转换组件、伺服阀和动力控制组件维修经验者优先考虑;

  ·?熟练阅读CMM, SOPM和SB;

  ·?掌握液压附件维修常用材料、流程、方法和工艺的知识;

  ·?基本的计算机应用能力;

  ·?有团队精神;

  ·?有液压测试设备使用和维护经验者优先考虑;

  ·?英语能力突出者优先考虑;

  ·?持有MEC025执照。

  ·?英语能力突出者优先考虑.

  ?

  ??NDT Inspector无损检测员

  【岗位职责】

  ·??执行所获认证资格的无损检测工作,负责解释和评估检测结果;

  ·??配合产品工程那个是于心能力开发时确定航空器零部件无损检测工艺;

  ·??负责编写相关无损检测工作程序和检测报告;

  ·??负责无损检测设备的日常维护保养和性能测试;

  ·??监控和安排无损检测设备、试块的定期校验;

  ·??协助工具设备工程师建立X射线能力,包括硬件及相关程序。

  【任职资格】

  ·?专科以上学历,无损检测类相关专业;

  ·?持有有效的航空器无损检测人员II级资格证书,要求具备X射线检测方法的资格认证(二级);如具有热成像或射线资格优先考虑;

  ·?具有一定的英语基础,英语四级及以上,能熟练阅读相关英文手册和资料;

  ·?至少3年以上航空行业无损检测工作经验;在X射线方面能够单独签卡放行;有建立X射线能力的经验;

  ·?身体健康、无色弱色盲;

  ·?熟练掌握各种NDT设备操作, 具有NDT设备维护经验;

  ·?掌握NDT相关手册、资料的查阅方法;

  ·?熟悉CCAR145部、CCAR66部相关规章要求。

  
 

  ?

  ??Avionics Technician航电技术员

  【岗位职责】

  ·?Repair aircraft avionics components per production plan

  ·?Coach young maintenance staff

  ·?Cooperating with engineering department to solve technical problems and build-up new capabilities

  ·?Assist team leader to organize team

  ·?Ensure the compliance of performance with LTS Quality policy/procedure and EHS policy

  ·?Routine check and maintenance of repair tools and equipment

  ·?Other tasks assigned by team leader

  ?

  【任职资格】

  ·?Aviation professional school education background with no less than 5-year aircraft component maintenance experience (including no less than 3 years on avionics component), or Aviation 3-year or 4-year college education background with no less than 3-year aircraft component maintenance experience (including no less than 2 years on Avionics component).

  ·?Holding Civil Aircraft Component Maintenance Personnel License (AVC).

  ·?Fluent reading of CMM, SOPM, SB, SL, and other technical data.

  ·?Good knowledge of materials, process, methods and techniques for avionics repair.

  ·?Basic knowledge of computer applications.

  ·?Team Spirit.

  ·?Item ratings and release-to-service experience of avionics component are plus.

  ·?Application, maintenance, and development experience of Avionics test equipment is plus.

  ·?Repair experience of the first batch of new repair capability is plus.

  ·?Good English is plus.

  ?

  ??Tool & Equipment engineer工具设备工程师

  【岗位职责】

  ·?Design and develop tooling & equipment as per request to fulfil operation activities; set up document management system and archiving all document in a safe and controllable manner;

  ·?Maintain tooling and equipment in good and available condition, lead and work with maintenance team to take action and solve problem in a prompt manner;

  ·?Coordinate with product engineer to develop required tooling & equipment timely and compliance with earthiness and company requirement for new capability set up;

  ·?Coordinate with purchasing and supplier to surveillance ongoing project, regular check the project processing and ensure project could be deliver in timely and required quality and quantity;

  ·?Coordinate with tool crib to perform good receiving and establish operator manual for purchased or developed tooling and equipment as necessary;

  ·?Support production to implement or optimize tooling, equipment or others to perfect the design and improve the safety or convenience, and gain more efficiency.

  ·?Set up and develop tooling & equipment standard, communicate with LHT tooling center to reach quick support and share experience with each on tooling and equipment design and management;

  【任职资格】

  ·?Bachelor degree or above, majored in mechanical manufacture and automation or engineering;

  ·?Minimum 3 year relevant work experience in machinery design or engineering, with professional knowledge in design field;

  ·?Skilled 3-D design software, such as solidworks, autoCAD, Catia etc;

  ·?Solid understanding on mechanical structure design, familiar with machinery skill and inspection;

  ·?Good interpersonal skills, problem solving oriented mind set;

  ·?Fluent in English speaking, writing and reading, pass CET 4 or 6 is preferred;

  ·?Familiar with tooling and equipment calibration theory and practice;

  ·?Have working experience on aircraft engine industry and good knowledge on CAAC/EASA/FAA aviation maintenance legislation if preferred.

  ?

  ??Electrical Equipment engineer电子设备工程师

  【岗位职责】

  ·?为飞机电子电气部件开发新的测试设备

  ·?维护并修理电子车间现有的测试设备

  ·?参与新能力开发项目(电子和电气部件)

  ·?为测试设备创建必要的校准程序并支持校准部门的相关工作

  ·?根据公司的各项规章指引创建和修改技术文档,如测试设备设计文档,测试设备技术规范,操作手册和维护手册等

  ·?与产品工程师紧密合作,完成各项任务

  ·?作为技术代表,对新设备投资进行可行性分析(商业计划)

  【任职资格】

  ·?本科或以上学历,主修电子电气工程或相关工程专业

  ·?熟悉模拟数字电路设计,软硬件设计,PCB电路板设计,微机系统,CPLD、FPGA、JTAG、UART、SPI等总线系统

  ·?熟练掌握一项或多项编程语言,如C语言。熟练掌握Labview、Teststand者优先

  ·?独立进行软硬件开发和调试工作

  ·?独立管理与外部生产厂家、供应商合作的软硬件开发项目

  ·?具备良好的英文书写能力和口语交流能力

  ·?能积极主动沟通个人想法

  ·?团队合作,以解决问题为导向

  ?

  ??Junior Design Engineer初级设计工程师

  【岗位职责】

  ·?Design new repair solution for all out of manual damages under LHT EASA Design Organization.

  ·?Design new repair solution and seek for other approvals, like FAA DER, related authority etc.

  ·?Develop new processes for the purpose to improve quality, reliability and cost-efficiency.

  ·?Lead the important projects such as new repair capability development and new product capability set up.

  ·?Have close communication with LHT engineers for the design and substantiation issue in daily work.

  ·?Cooperate with LHT engineers for important repair development projects.

  ·?Support product engineer to select the best solution for out of manual damages.

  ·?Support product engineer for the implementation of new repair and new process.

  ·?Provide technical support, advisory to workshop as required;

  ·?Assist Engineering Administration for procurement of necessary documents required to perform the intended design/development;

  ·?Other tasks assigned by Head of Engineering (Engineering Manager).

  【任职资格】

  ·?Bachelor above, master desirable

  ·?5 years of relevant work experience in the Aviation MRO workshop or engineering

  ·?Fluent in English and Chinese; German/other languages desirable

  ·?Be familiar with using MS office, Excel, Word & PowerPoint

  ·?Willingness to travel

  ?

  ??Production Engineer产品工程师

  【岗位职责】

  ·?Develop and maintain maintenance capability in accordance with the quality standards, qualifications of employees, tools & equipment requirements, materials requirements, and documentation requirements;

  ·?Perform activities associated with the development or improvement of maintenance processes (technology) with regard to quality, reliability, and cost-efficiency;

  ·?Incorporate statutory regulatory requirements as well as customer requirements into maintenance standard working documents;

  ·?Define and maintain maintenance standards for production in order to effectively manage maintenance process;

  ·?Define applicable scope of work and translate it into workable shop floor documentation;

  ·?Provide technical support, advisory to workshop as required;

  ·?Provide technical support for the investigation of customer complains;

  ·?Follow each sale order including determining proper work scope, issuing the proper shop router, selecting different solutions for different finding based on cost, quality, TAT etc., preparing shop finding report;

  ·?Report the out of manual repairs, existing repairs, and abnormal discrepancies and provide proposal to OEM/design engineer/customer service/DER etc;

  ·?Report/communicate with customer engineering for the work scope, discrepancy, out of manual repairs etc;

  ·?Work with Sales or Customer Service providing engineering evaluation, planning data or cost estimation for customer inquiry;

  ·?Co-operate with Quality Assurance to develop and maintain the quality standards for workshop;

  ·?Assist Tool & Equipment Engineer for procurement of adequate tools & equipment required to perform the intended scope of work at expected production volume;

  ·?Assist Material Purchase staff for procurement of adequate materials required to perform the intended scope of work at expected production volume, including the subcontracting of work if required;

  ·?Assist Engineering Administration for procurement of necessary documents required to perform the intended scope of work;

  ·?Other tasks assigned by Head of Engineering (Engineering Manager).

  【任职资格】

  ·?University degree majored in aviation/aeronautic engineering, or any equivalent education which is considered suitable for the job;

  ·?Knowledge of relevant airworthiness standards, regulatory requirements;

  ·?Extensive/proficient knowledge of A/C engineering know-how for repair and overhaul processes of aircraft structure and structural components;

  ·?At least 3 years’ experience as a Structure Engineer for A/C or structure component following an appropriate training concept, or similar knowledge and experience gained over several years’ professional experience of A/C maintenance or component maintenance or any other equivalent experience which is considered suitable for the job;

  ·?Fluent in English speaking, writing, and reading;

  ·?Sound knowledge of computer applications;

  ·?Skill and knowledge of trouble-shooting, analysis and statistics;

  ·?Accountability and self-motivation;

  ·?Ability to withstand stress, self-confidence and decision-making drive;

  ·?Work independently and initiatively.

  ?

  ??Engine Operation Center Event Coordinator运营专员(飞机发动机运营中心)

  【岗位职责】

  ·?Focal point of contact for LHT Customer Service for all new AST/repair station;

  ·?Focal point of contact within the network between all repair stations worldwide;

  ·?Focal point of contact for Network EOC regarding network utilization/discussion;

  ·?Clarification/evaluation with Engineering regarding requested work scope;

  ·?Internal and external coordination(with customers) for engine services assignment (On-site repair and shop repair) if applicable collect engineering questions/requirements and coordinate with Material and tooling department(repair station) the material and tooling availability;

  ·?Event preparation prior induction but not limited to:

  ·?Assigning Engineering to create Job cards.

  ·?Assigning Material/tooling department to order material/tooling accordingly material/tooling list.

  ·?Assigning travel arrangements in case of an AST event.

  ·?Pre-check of new inquirys if it can be accepted at the repair station in general

  ·?Responsible for clarification within network, if any support from other repair stations would be necessary to ensure upcoming inductions or ongoing work in case of e.g. tooling support, manpower support)

  ·?Maintain good work coordination with customer and fulfill relevant customer requirement and expectation;

  ·?Responsible for the commercial docs and invoice issuance.?

  ·?Ensure quality by supporting reasonable quality and risk management;

  ·?Cost control for individual event.

  ?

  【任职资格】

  ·?Bachelor above, master desirable, majored in engineering, preferred in power plant engineering;

  ·?Relevant work experience in the Aviation MRO or equivalent experience with strong engine technology;

  ·?Thorough knowledge of CAAC/EASA/FAA aviation maintenance legislation;

  ·?Experience in event management is a plus, engine type training, practical experience desirable;

  ·?Fluent in English and Chinese; German/other languages desirable;

  ·?Be familiar with using MS office, Excel, Word & PowerPoint;

  ·?Willingness to travel.

  ?

  ?

  销售类

  ??Sales?Manager销售经理

  【岗位职责】

  ·?Actively promotion and sales of products and service of the company;

  ·?Developing and maintaining customer relationship;

  ·?Taking the responsibility of sales target, e.g. revenue and GPM;

  ·?Cooperating with customer service to satisfy customer demand;

  ·?Performing sales process;

  ·?Collecting market information and customer demand;

  ·?Preparing and making offer and proposal;

  ·?Preparing and negotiating contract;

  ·?Handling customer concerns and questions;

  ·?Collecting payment from customer;

  ·?Taking care of customer complain and warranty, together with customer service;

  ·?Transferring customer demand and market information in order to develop new product or improve service;

  ·?Cooperating with group sales and sales from other PDs to promote our products;

  ·?Actively participating customer events;

  ·?Take on special tasks, coordinate all business activities as assigned by deputy GM.?

  【任职资格】

  ·?Bachelor degree and above, commercial related major, preferred in aviation industry;

  ·?At least two years working experience in sales, business development or commercial related work;

  ·?English fluency, speaking and understanding Cantonese is a plus;

  ·?Open minded;

  ·?Intercultural competence;

  ·?Highly flexible with time, dedicated to work;

  ·?Good at building up relationship;

  ·?Clear spoken and written expression;

  ·?Very good analytical skills ,negotiation skills, assertiveness and high level of persuasion;

  ·?Target Orientation;

  ·?Good computer skills (MS-Office);

  ·?Ability to handle stress

  ·?Holding driving license.

  ?

  ??Account manager-asset management and OEM cooperation客户经理-资产

  【岗位职责】

  ·?Manage customer accounts with contracted MRO business in terms of commercial and service fulfillment;

  ·?Manage spares and coordinate within LHT group regarding spare allocation/support;

  ·?Strategic coordination/negotiating with market spare vendor to ensure spare support out of LHT group capacity;

  ·?Manage OEM licensing contract and communicate closely with LHT program manager;

  ·?Support sales team/customer service team for RFP which needs spare support.

  ·?Support sales team for B787/A350/A320NEO nacelle program based on expertise of OEM license agreement knowledge;

  ·?Monitor business development according to plan and lead corrective measures if necessary;

  ·?Secure service levels, identify areas of improvement, and implement changes in coordination with the respective business units;

  ·?Develop and implement measures to increase customer satisfaction, systematically strengthen the relationship with your assigned customers, and identify additional opportunities for more business;

  ·?Optimize the business relationship and implement change requirements in the contractual baseline;

  ·?Align sales campaigns together with product sales department and adjoin the negotiation of contract amendments together with corporate sales;

  ·?Support sales during RFP process from side of cost, shipping solution, spare supply, etc.;

  ·?Analyze the margin of each single business case or project to ensure positive profitability;

  ·?Cooperate with multi-functional customer service teams across various to jointly reach the fulfillment targets;

  ·?Adjoin customer related projects as necessary.

  【任职资格】

  ·?Completed university-level studies in Civil Aviation/Economics/International Trade;

  ·?Strong economic know-how;

  ·?More than 3 years of experience in aviation, in particular in customer service, planning, logistics or material supply is preferred;

  ·?Deep understanding of nacelle products of different aircraft type preferable;

  ·?Fluent in both written and oral English is a must;

  ·?System knowledge MS-Office (excel in particular), SAP;

  ·?Strong analytical skills as well and structured work style ;

  ·?Team player;

  ·?Thrives in customer service;

  ·?Strong negotiations and persuasion skills, as well as exceptional verbal and written communication;

  ·?Confident demeanor and intercultural competence;

  ·?Entrepreneurial thinking and high degree of self-driven initiative;

  ·?Willingness to travel extensively within Asia Pacific/Europe/USA and other region;

  ·?Capable to work well under deadline pressure and extra hours.

  ?

  ??Account?Manager客户经理

  【岗位职责】

  Manage the customer relations and the contract to ensure the delivery performance and financial result are in line with business plan and/or budget:

  ·?Manage customer accounts of Lufthansa Technik (Shenzhen) within China Region and build strong relationships with customers;

  ·?Assume financial and performance responsibility for assigned customer accounts, take all necessary actions to bring the business development of products on the planned track;

  ·?Manage interfaces within Lufthansa Technik Group relevant to fulfill the customer contracts (e.g. aircraft component engineering, supply chain management, finance, logistics, etc.);

  ·?Cooperate with Sales, Finance and Controlling and related departments to ensure the fulfillment of all issues, including on time payment;

  Achieve Up-selling and business development:

  ·?Identify and pursue sales opportunities for existing customers in cooperation with Marketing and Sales;

  ·?Prepare and host contract performance & review meetings with customers and top management;

  ·?Continuous optimization of overall processes to improve the efficiency of the assigned contracts;

  ·?Perform support functions and special tasks as assigned;

  ·?Support on tenders;

  ·?Lead and/or take part in the projects, take on and all other duties assigned like performing support functions and deputized duties as assigned, such as Back-up;

  【任职资格】?????????????????????

  ·?University or technical college degree in Engineering or Business Administration;

  ·?Very good knowledge in customer service or sales;

  ·?Relevant professional experience in a customer relations / client servicing role, preferably in material management, technical customer service or maintenance of aircraft;

  ·?Fluent in English;

  ·?Knowledge of Chinese (Mandarin, Cantonese) or other Asian languages (e.g. Korean, Japanese);

  ·?Good computer skills (MS-Office, SAP);

  ·?Ability to work within teams;

  ·?Very high service and customer orientation;

  ·?Clear spoken and written expression;

  ·?Negotiation skills, assertiveness and high level of conviction;

  ·?Self-confident and responsive appearance / contact behavior;

  ·?Strong self-initiative and creativity;

  ·?Very good analytical skills and ability to structure / dispose / plan complex processes;

  ·?Intercultural competence;

  ·?Willingness to work abroad;

  ·?Openness for professional development;

  ·?Ability to handle stress.

  ?

  ??Account Manager-general purchasing采购主管(非航材)

  【岗位职责】

  Material Planning and ?Management

  ·?Support OL-P manager to define the inventory strategy and assign the tasks/targets to responsible team member;

  ·?Supporting OL-P manager to define the KPI for material planning and purchasing related business and monitoring the KPI regularly;
Assign the jobs to the team members with supporting from OL-P manager;

  ·?Conduct high value goods/projects purchasing with supporting from OL-P manager;

  ·?Ensure the compliance of regulatory/ network/ company requirements and standards;

  ·?Monitor the KPI the team, do the analysis of the result and take actions to improve the performance if necessary;

  ·?Support team members to define adequate material requirement for new capability development such as new product type development with support of Product Engineer if applicable;

  ·?Communicate with the other departments to collect and feedback the related information;

  ·?Coordinate with purchasing, transportation and customs to make sure material provided on time;

  ·?Incorporate statutory regulatory requirements as well as customer requirements into material planning, warehouse management process;

  ·?Work with production, production control and customer service for parts swapping due to long lead time of shortage parts and subcontracting parts, etc;

  Induction and Process harmonization in the network

  ·?Support OL-P manager to contact with TN and other LHT companies to develop group purchasing projects/activities, and to conduct contract negotiation with group suppliers;
Participate and contribute in further LHT network standard setup with support from OL-P Manager;

  ·?Close collaboration with other departments and optimize the procedures;

  Controlling

  ·?Supports the OL-P manager and overall network in achieving financial and non-financial operational KPI’s;

  General

  ·?Takes on special projects and all other duties assigned by the OL-P Manager.

  【任职资格】

  ·?Bachelor degree or above, majored in aviation related or business management related is preferred;

  ·?Min. 5 years of relevant work experience in the Aviation MRO thereof 2 years in management role and 2 years working experience in material planning and purchasing and in general goods purchasing;

  ·?Thorough knowledge of material airworthiness of CAAC/EASA/FAA;

  ·?Fluent in English and Chinese; German/other languages desirable;

  ·?System knowledge MS-Office, Excel, Word & PowerPoint;

  ·?Strong analytical skills as well and structured work style;

  ·?Understanding of mathematical concepts and cost consciousness;

  ·?Willingness to travel.

  ?

  职能(支持)类

  ·?ERP Engineer软件工程师

  【岗位职责】

  ·?在ERP系统中创建和部署解决方案,以优化业务流程;

  ·?维护ERP系统的日常运行,解决出现的问题;

  ·?创建和维护业务报表;

  ·?维护其他IT应用系统;

  ·?领导及参与新业务系统的导入或业务系统的集成项目;

  ·?其他领导安排的工作。??

  【任职资格】?

  ·?大学本科以上学历,计算机、信息管理或企业管理相关专业;

  ·?熟悉ERP原理,熟悉企业相关业务流程及ERP系统管理及项目实施经验;

  ·?1年以上ERP工程师或相关工作经验;

  ·?具备高度责任心和敬业精神,积极主动,一丝不苟;

  ·?良好的沟通表达能力、较强的知识提炼和应用能力,团队协作能力;

  ·?良好的英语听说能力;

  ·?具备SAP,微软CRM,金蝶K3经验尤佳。

  ?

  ·?Customs Declaration报关员

  【岗位职责】

  ·?收集来自其他部门和人员的物流需求;

  ·?根据业务背景选择正确的贸易模式报关;

  ·?根据海关规定制作报关文件,如中文品名、规格、税则编码;

  ·?操作EDI、QP、Q-pass等海关报关系统;

  ·?操作LTS相关管理系统;

  ·?进出口业务中能很好地协调海关,检验检疫部门和货代;

  ·?进出口业务中能代表公司解释问题和处理差错;

  ·?及时跟踪报关状态,更新相关信息进ERP系统;

  ·?在ERP系统里维护海关报关数据, 按照海关的规章和公司的质量体系管理相关的数据和文件;

  ·?所有的行为、业务活动和操作必须遵守相关国际贸易、海关和公司的规章制度

  【任职资格】

  ·?大专及以上学历,?物流、国际贸易相关专业优先;

  ·?两年以上相关工作经验;

  ·?没有海关不良记。